Starting SL, using JACK

Problems getting SL up and running on a Mac? Post here.

Moderator: jesse

Post Reply
teddy
Posts: 5
Joined: Thu Jan 22, 2009 8:42 pm

Re: Starting SL, using JACK

Post by teddy »

Hey Jesse,

I am using the built in audio for a macbook for the time being.
I tried the Aggregate Device creation but the same things happens in the input (system and sooperlooper show up) and output ports (just sooperlooper shows up). For the latter, there are upto four streams: common out 1, common out 2, loop0 out 1, loop0 out 2. These are all under sooperlooper as the receive ports. System still does not show up in that column.
any suggestions?
jesse
Posts: 554
Joined: Sat Sep 06, 2008 9:46 am
Contact:

Re: Starting SL, using JACK

Post by jesse »

Can you post screenshots of the preferences window for JackPilot? Also, for the Aggregate device editor, and the audio midi setup window with the aggregate device selected?

jlc
micmee
Posts: 3
Joined: Sat Dec 19, 2009 6:28 am

Re: Starting SL, using JACK

Post by micmee »

Greetings.

I am using Jack/SL in Snow Leopard.

I cannot see Sooperlooper in the Connections Manager of JackPilot.

I did things in the following order:
• Create Aggregate Device
• Open JackPilot
• Select Agg. Dev. in JackPilot preferences
• Click 'Start' JackPilot
• Open sooperlooper
• Click 'Routing' in JackPilot
• The attached screenshot is what I see
Screen shot 2010-04-02 at 11.35.09 AM.png
Screen shot 2010-04-02 at 11.35.09 AM.png (25.71 KiB) Viewed 46860 times
As you can see, I have no sooperlooper options showing up in the connection manager.

I get the 'Lost connection to Sooperlooper engine' error on a regular basis.

I have also tried opening things in other orders.

Please help, I'm rather confused.

Thank you
teresap989
Posts: 1
Joined: Thu Sep 30, 2010 8:48 pm

Re: Starting SL, using JACK

Post by teresap989 »

teddy wrote:Hey Everyone,

I am just setting things up with SL and am stuck. I have followed Jesse's directions up until "double-click the 'system' item in the right column." A system item does not appear in the 'Receive Ports' column just the Sooperlooper option.

When I go back into SL I can see that sound is being picked up by the mic but nothing comes out.

What do I have to set in order to get this going?

Cheers!!
I also think so.thanks




__________________
watch free movies online
Post Reply